Fire protection, fire rating B, second only to stone Wear resistance, wear resistance Grade TWangshi,The reinforced composite floor structure is divided into wear-resistant layer, decorative design layer, high-density board layer and balance (waterproof) layer. A large amount of mixed glue is added to the lining.If the glue used by the manufacturer fails to pass the test there will be formaldehyde. The reinforced composite floor is wrapped with high-rise plastic film to ensure that formaldehyde remains inside.However, when the temperature is constantly changing and applied, formaldehyde will leak into the air. After days, Fire protection, fire rating B, second only to stone.However, SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body. Look at the surface of the board.

Stimulating effect.After the wax on the ground has set, scrape off the protruding part along the ground with a plastic ruler or credit card. Identify from the packageproperty right,Structure: artificial surface material, artificial basic, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability. Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor, without keel. As long as the ground is flat, due to the simple installation regulations, the safety hazards caused by installation are also greatly reduced.Solid wood flooring has high environmental protection, and is deeply loved by many small partners.Solid wood flooring has many advantages, but the later cleaning and maintenance is very important and troublesome.How to clean and wax solid wood floor? High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, Armstrong flooring in the United States Jiefu and Tejia flooring in France, fulbo flooring in Sweden, longxilu, tahilong, Dongli flooring in Japan, and domestic bonier flooring.For the pursuit of cost performance, choose Korean brands, Japanese brands for the pursuit of quality European and American brands for the pursuit of brand effect, and domestic brands for low prices.Service first,SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room,WangshiSPC floor pavement, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use,WangshiWhich brand of composite floor essential oil is good, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First,WangshiHow to choose laminate flooring, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.The influence of foundation materials on the price of reinforced base plate.Strengthening the middle layer is mainly the base, and the method to distinguish the base material is good or bad.You can cut off the garbage with the merchant to see if it is white. The whiter the better.Generally, the base plate of reinforced floor accounts for most of the price of reinforced floor.High priced laminate flooring is a good base material. Mixed pine is used as the base material for second-line and third-line brand flooring. Of course, the production cost is not high, and the price of laminate flooring can also be borne.In addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.Wangshi, After days maggots appeared on the floor.This problem is because the floor contains a lot of impurities.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s the material will not be very expensive, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks. Identify from the package