ZhejiangSmall 100kg electric elevatorThere are several ways to install the structure
2023-08-23 08:57:09Before operating the construction electric elevator, routine inspections should be carried out according to regulations and inspection records should be filled out.Setting requirements: The verticality deviation of the installation of the guide rail frame of the construction electric elevator should comply with the requirements of the user manual and specifications as specified in the above table.Zhejiang,When charging, it is necessary to charge it in a timely manner. When the equipment is used for about months (according to the actual frequency of use), it is necessary to add grease to the rotating parts once; Regularly inspect the working status of the pin shaft of the fully self-propelled electric elevator every month, hands, and feet out of the shaft and objects from falling into the vertical shaft. Its vertical position should be closed, its cabin should be full of doors, passenger car doors, and car roof doors not being closed.; Door interlocks should be installed on both the vertical and passenger compartment doors.Delicias,Setting requirements: The installation and dismantling workers, electricians, and other operators of construction electric elevators should have special construction operations.Setting requirements: Drainage measures should be set up for the foundation of construction electric elevators to ensure smooth drainage.Speed limiter. To prevent the driving speed from exceeding the normal speed. A speedometer should be installed (not required for floors below or including the second floor), which is an individual mechanism that is integrated with a safety clamp; The entrance and exit of the passenger compartment should be equipped with safety doors. Public places, family dormitories, and
During loading and unloading, the horizontal distance between the edge of the cage door and the edge of the landing station should not exceed mm.When adding hydraulic oil we can extend the oil cylinder to the high position for filling. When filling, the lifting platform should not exceed the high position, and then retract the oil cylinder back to the low position to check if the hydraulic oil level is lower than the low position,ZhejiangElectric fixed elevator, and maintain it between the two.When the wall bracket cannot meet the requirements of the construction site, it should be designed and calculated separately.High quality and low price,As a material loading and unloading equipment recognized by customers in the lifting platform, the guide rail hydraulic lifting platform is superior in terms of product, civil engineering, and operating costs. The editor of the electric elevator will provide a detailed analysis: the advantages of the product are that the equipment bears a large load, can achieve multiple points, and can be controlled up and down floors to achieve safe use.The landing door should meet the requirements of the specifications and achieve standardization.The quality of the standard section should comply with the product manual and specification requirements.
The use of a lifting platform as a tool for storing performance blankets, soft scenery, etc. In some theaters, there is a soft scenery storage lifting platform located at an appropriate location on the stage for the storage of blankets, soft scenery, etc.Click to view,Setting requirements: When the distance between the outer edge of the construction electric elevator and the external overhead power line cannot meet the requirements of a small safety distance, the protective measures taken should comply with the specification requirements.Do not move after lifting, and do not lift until the four legs are firmly supported.High lifting height, using side mounted oil cylinders, stable operation,ZhejiangElevator scissor electric, noise free easy maintenance, and longer service life.Zhejiang,The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.The motor of the hydraulic guide rail lifting platform is set around the wellbore, improving the utilization rate of the wellbore area.When the foundation is set on the roof or floor structure, the bearing capacity of its supporting structure should be checked.