distribution box, etc. should be kept clean regularly and dust on electrical equipment should be promptly cleaned.Each box, distribution box, etc. should be kept clean regularly and dust on electrical equipment should be promptly cleaned.Mentougou,The higher the number of masts, the better the stability of the elevator, and the greater the stability load on the platform.It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.Sakhrah,Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found, they must be promptly eliminated.The surface of each part of the brush should be kept clean and the brush pressure should be adjusted to ensure that its area is not less than %.In low concentration carbon monoxide gas. It can cause symptoms such as headache, nausea and vomiting shortness of breath, psychological confusion, and even brain damage. In severe cases, it can cause death, such as starting the engine of the equipment in the garage.

Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found, they must be promptly eliminated.Aluminum alloy elevators have the advantages of beautiful appearance, small size, light weight,MentougouAluminum alloy explosion-proof elevator, balanced lifting, safety and reliability. They are widely used in factories, hotels, restaurants, stations, airports, theaters, exhibition halls, replacement of lighting fixtures paint decoration, electrical cleaning and maintenance, and other purposes. Adopting high-strength and high-quality specialized aluminum profiles, it has the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability.The aluminum alloy elevator with strong controllable performance is easy to operate and has high accuracy, which can meet the different needs of different heights, press and stop, making high-altitude operations simple and feasible.resources,Pay attention to checking each steel wire rope for broken wires and loose strands. If it exceeds the relevant regulations, it must be replaced immediately. The maintenance and upkeep of steel wire ropes should strictly follow the provisions of GB-.The standard rack free design of the lifting and lowering machine with high safety performance ensures that the platform will not fall, and the limit and limit switches further ensure the safety of construction personnel.The main components of the Hunter hydraulic fixed elevator are: . The shaft part is a closed or mesh frame enclosed by buildings or lightweight steel structures, with steel guide rails installed on both sides of the interior. . The driving part is equipped with a hydraulic drive motor,MentougouMaking aluminum alloy ladder machines, oil pump, and safety valve, A small oil tank for hydraulic components such as speed control valves and directional valves: . The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: . The door system part: It is a closed or mesh platform door or landing door system composed of steel structure, with manual and automatic doors. Generally, open platforms do not have doors. . The electrical part: It includes power, signal, Composition of safety and lighting devices: Platform parts: It is a steel structure platform that carries heavy objects, which can be closed (i.e. cabin type) or open,MentougouAluminum alloy elevator for high-altitude operation, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators, we need to regularly inspect, maintain, and maintain them, which can not only extend the service life of the aluminum alloy elevator, Can make it work with greater power! For example, the transmission part should have sufficient oil, repaired, or replaced. Mechanical bolts, especially parts that frequently vibrate, such as slewing bearings and lifting arm connecting bolts, should be checked for looseness. If there is looseness, it must be tightened or replaced immediately. Next, let's take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).

There are many factors that affect the price difference of aluminum alloy elevators, possibly due to regional factors. The increase in shipping costs can also lead to an increase in equipment prices. Therefore, when choosing a better time period, its price will not fluctuate significantly. Here is the aluminum alloy elevator we share with youInstallation materials,When encountering overheating in the motor, it is necessary to stop it in a timely manner and continue running after troubleshooting. The motor bearings should be in good condition.What should we do if water impurities seep into the hydraulic system of aluminum alloys? We are well aware of the harm that water impurities can cause to the hydraulic system of aluminum alloys. However, how can we prevent water from seeping into the hydraulic system of elevators? After reading this article, you may know that excessive water impurities in oil can cause corrosion of aluminum alloy lifting hydraulic components, emulsification and deterioration of oil, decrease in oil film strength, and accelerate mechanical wear. In addition to preventing water impurities from invading during maintenance it is also important to note that when the oil storage tank is not in use, the cover should be tightened and placed upside down; Oil with high water content needs to be filtered multiple times, and the hydraulic oil of the elevator that is filtered each time needs to be replaced with a dry filter paper. In the absence of specialized instruments for detection, the oil can be dropped onto the hot iron plate, and no steam can be emitted before being added immediately. So when repairing the hydraulic system of aluminum alloy, be careful of the entry of moisture!Pay attention to checking each steel wire rope for broken wires and loose strands. If it exceeds the relevant regulations, it must be replaced immediately. The maintenance and upkeep of steel wire ropes should strictly follow the provisions of GB-.Mentougou,It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes, it must be immediately rinsed with clean water.Next let's talk about the maintenance and upkeep of mechanical equipment for aluminum alloy elevators: the brakes of each mechanism should be regularly inspected and adjusted to ensure flexibility and reliability.The problem is that the power indicator light is on, but there is&quo; in the electrical box when the up button is pressed; Clacking sound&rdquo, Does the platform not rise or can only rise to a limited height?