After the elevator is lifted, it is necessary to fully study the maintenance manual of the elevator and do a good job in use and maintenance. In the detection of various indicators of the elevator, it is necessary to follow the regulations and ensure that the elevator is idle.Drain and discard the hydraulic oil, tighten the joint, remove the oil filter, clean it with compressed air, and then return it to the oil tank and connect the pipeline.Ensad,Platform part: It is a steel structure platform that carries heavy objects, which can be closed (i.e. car type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame.Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, the tools should be classified and organized, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out,EnsadRear hydraulic lifting platform, which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, and whether the equipment still has problems after the maintenance is completed.Welisara,Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well,EnsadPlatform hydraulic lifting platform, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturersThe fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable, and easy to repair and maintain. Diesel powered models have two wheel, four wheel drive, and steering. Free turning equipment. Urgent descent system. The operation height ranges from meters to meters, which have the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability. It is widely used in factories, airports stations restaurants, theaters, exhibition halls, and other places. It is a good safety partner for maintenance equipment, painting decoration, changing lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.

Compact structure, small size in transportation status, able to enter the car of general elevators, as well as smooth door openings and narrow passages.Introduction to the classification of scissors by structure: scissors are widely used specialized equipment for high-altitude operations. Its scissor fork type mechanical structure provides high stability after the lifting platform is lifted, with a wide working platform and high load-bearing capacity, making the range of high-altitude operations larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safe. It is a widely used high-altitude work lifting equipment.The main purpose of the elevator is to install and maintain power lines, lighting appliances, elevated pipelines, etc.,Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.The platform extends by . meters, expanding the working range.Support is an important preparatory work for elevator operation. The elevator should choose a flat ground, such as a foundation or uneven terrain, and must be padded with sleepers before proceeding with work.

Single group high-strength mast elevator, with light weight and good maneuverability, suitable for single person operation.Application process,Elevator operation status: The elevator products are made of high-strength and high-quality materials, which can be divided into single masted, double masted, three masted, four masted, and six masted types according to the lifting height. Generally, single masted types are used when the lifting height is below meters, double masted types are used when the lifting height is between meters and meters, and three masted or four masted types are used when the lifting height is between meters and meters.Features: Made of high-strength and high-quality aluminum alloy material, it has the advantages of beautiful appearance,EnsadHydraulic system lifting platform, small volume light weight, smooth lifting, safety and reliability. Its appearance allows for high lifting capacity in extremely small spaces. The column lifting system has the characteristics of large load capacity strong stability, large platform area, and convenient implementation.The elevator has a non slip surface. The guardrail is durable and durable. After the end track is extended, it can accommodate larger goods.Ensad,Firstly, the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the elevator, the power must be disconnected, and the power must be verified and hung up; No power transmission, people working&# quo; Identification plate for. During the maintenance process it is not allowed to disconnect the grounding wire of the elevator. If it is necessary for maintenance work, after the maintenance is completed, it is necessary to ensure that the spare parts are availableThe double protection leg structure ensures safer work and can be used for lifting and lowering operations close to the working face.Compact in structure, it is a small lifting platform that can enter narrow passages and elevators.