Finally, heat conduction is fast. What does the real wood floor look like?Nagarote,Laminate flooring has the warm and comfortable characteristics of wood flooring. Laminate flooring of well-known brands, such as flooring in Europe.High quality Chinese fir chemical fiber inhibits the board with low formaldehyde concentration, comfortable and environmental protection.Floor agent (floor franchise) trap : false brand halo.qualityDikhil,The combination of hardness and softness.The wood floor in the living room should be made of boards without knots, cracks and mildew. Generally, Fraxinus mandshurica, camphor and teak are better, because their lines are beautiful and clear, and their texture is moderate.The laying method of wooden floor is not very difficult, but it is required to have a certain carpentry foundation.Firstly, the wood board shall be processed into the length and width coordinated with the room size according to the room size and the floor shall be cleaned before laying.When laying, draw the center point and vertical and horizontal vertical lines of the room, and lay from the center to the four sides. glue and an appropriate amount of cement can be used for bonding between laths.Note that the glue must be coated evenly to avoid the warping of the plate. One week later, the floor sank to the bottom, and the color of the water turned yellow and black. The water contained a lot of impuritiesWhen asked about the service life and wear resistance of SPC floor in the message area of the message board,NagaroteCan the floor leather stick to the wall, it is often mentioned to take out artifact such as fruit knife or key and scratch on the surface of SPC floor. If there are scratches,NagaroteBenefits of wood flooring, they are classified as non wear resistance.In fact, the national wear resistance test of PVC latch floor is not simply to scratch on the surface with artifact, but to grind and polish the floor with thick bottom circular stone roller under the condition of kg charging. After how many revolutions of rotation and polishing, the wear-resistant layer on the floor surface is damaged and exposed to the speed of rural grass-roots.The rotational speed of this connection point is an index value considering the wear resistance of PVC latch floor.For example, customers attach great importance to quality.Although the solid wood floor is good the wear resistance of PVC latch floor is professionally measured by the national testing center.

When choosing wood flooring in , the maintenance is very complicated.In ,NagarotePrice of wooden floor in Basketball Hall, all stores released high wear-resistant solid wood flooring.It is said that this kind of floor not only has the characteristics of high wear resistance and general solid wood floor, but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Laminate flooring contains a certain amount of indoor formaldehyde, which is harmful to the body beyond the index required by the state (mg / L).When purchasing, it is best to select commodities with national environmental protection logo verification or national inspection free products.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E, E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel seriously endangering human health, so it must not be used for home decoration.Therefore there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ‡ / L. although it basically does not pose a threat to the human body, there are still a lot of free formaldehyde left in the floor.The flooring industry has started the second environmental protection revolution and launched E environmental protection standard, which has reduced the formaldehyde emission of the floor to . ‡ / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, and then smell it with your nose. A good floor should have a wood smell, but a bad one has a strong pungent smell!Supply chain quality management,Structure: artificial surface material, artificial basic, wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability. Moisture proof, toilet and can be used in kitchen, basement, etc. Solid wood flooring.

Foot feelassets,The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelBut in any case, the compound floor will have formaldehyde, which can not be prevented.If you want to use formaldehyde floor, I suggest using multi-layer and three-layer solid wood composite floor, which has a better effect on formaldehyde purification.Now, wood flooring has become one of the commonly used ground decoration materials.While enjoying sports and fitness experience, people also pay more attention to the health of the surrounding environment, which is the favorite of many sports lovers.In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, small water absorption, good insulation, self extinguishing, easy cleaning, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, and the total thickness is mm (household) ~ mm (public building).Nagarote,Polymer base material layer: a composite plate made of stone powder and thermoplastic polymer materials after stirring evenly and then extruded at high temperature. At the same time, it has the properties and characteristics of wood and plastics. Therefore, this floor has good strength and toughness. Ecological environmental protection;Structure: artificial surface material, artificial basic wood slag plus strong glue, additives and additives.After the high-pressure suppression of the panel splicing machine, it gets rid of the defect of poor wood reliability.Fifth, smell with your nose is not protected by the environment.