Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, stacking, and transportation of autoclaved aerated concrete blocks.　　 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade and standard number.Shen County,Shen County, LiaochengAerated block, Liaocheng,　　Blocks can be produced using different processes based on material types, quality and equipment process characteristics. Generally, fly ash or　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.Hanoi,　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added and processed through batching, mixing,Shen County, Liaochengautoclaved aerated concrete block, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is - times that of reinforced concrete. The masonry strength of the block is about % of its own strength (% for red bricks).　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is - times that of reinforced concrete. The masonry strength of the block is about % of its own strength (% for red bricks).　　Due to its high water absorption rate and drying shrinkage rate, concrete blocks are prone to wall problems after use in construction projects　　 Blocks are classified according to their compressive strength and volumetric density.Job description,　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.　　 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade, and standard number.　　Marking examples: strength level A, bulk density level B, superior

　　 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, first-class product (B), qualified product (C).Sincere service,　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table 　　Block. And it is required that each design unit should indicate the strength of the materials in the design documents when selecting them, the superior performance and widespread application of precision blocks have been recognized and loved by many construction engineers and designers. Autoclaved aerated concrete blocks, aerated blocks, aerated bricks, foam bricks, foam forming, light bricks, steam cured aerated blocks, steam cured aerated bricks, etc. are all the same. It&#;s just that different regions have different understandings and titles. Autoclaved aerated concrete blocks are a type of porous concrete block made from fly ash, lime, cement, gypsum, slag, etc.　　 Blocks are divided into three levels based on dimensional deviation, appearance quality,Shen County, Liaochengaerated block brick, volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).Shen County Liaocheng,　　There are seven strength levels: A, A, A, A, A, and A　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.　　 Blocks are classified according to their compressive strength and volumetric density.