The packaging is rough, the printing quality of the publicity album is poor, the attributes are pieced together, and the slogan selling points are set by set, which often misappropriates the album attributes of large companies. Daily maintenance does not need waxing. It can be wiped with towel or wet mop. It is widely used in indoor families, studies, factories, public places, supermarkets, businesses, hard SPC indoor floor.SPC floor takes calcium powder as the main raw material. After plasticizing and extruding sheet, SPC floor does not contain heavy metal formaldehyde with harmful substances. It is an environmental protection floor free of formaldehyde and a real formaldehyde floor.Cuautla,CuautlaHow much does it cost to change the floor,The maintenance of SPC floor is very convenient. If the floor is dirty, you can wipe it with a mop.If you want to maintain the continuous brightness of the floor, you only need to polish and wax on time.Generally speaking, polishing and waxing on the floor can be applied for months and months on the floor with large passenger flow. Its maintenance frequency is much less than that of other floors.In the decoration of new houses some roads in the home are fully covered with wooden floors, but over time, the wooden floors are very easy to deform, curl edges and are not waterproof. Now such raw materials are particularly popular abroad. The real indoor formaldehyde is not deformed. No wonder it is popular ~. Water resistanceAlmalyk,sound insulationAfter - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth,CuautlaColor of laminate flooring, whether the tenon and groove bite is appropriate, not too loose or too tight by hand and eye observation.At the same time, carefully check the assembly height difference and gap between floors. Keep the floor dry and clean. If there is dirt on the floor surface, generally wipe it dry with a damp mop without dripping water.

days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.Laminate floor is composed of wear-resistant layer, decorative layer,CuautlaFloor leather brand, base material and balance layer.The wear-resistant layer, decorative layer and balance layer are manually printed. The base material is made of fast-growing forest materials, which is lower than that of solid wood floor. At the same time it can be produced on a large scale and has high cost performance.According to different substrates, the price difference is obvious, and customers have more room to choose, which is suitable for people of all levels.Characteristics of fake and shoddy laminate flooringinstall,Secondly, the wear resistance is several times that of ordinary floor.stability It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:

Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.build, Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge. If the address cannot be used temporarily, the indoor air quality and commodity circulation shall be maintained, and it shall not be covered with plastic boxes or newspapers, so as to prevent the long-term surface paint layer from becoming sticky and dull.The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride is an environment-friendly, non-toxic and renewable resource. It has been widely used in people&#;s daily life, such as tableware and medical infusion pipe bags. Its environmental protection does not need to be worried.SPC floor (sheet) is mainly composed of natural stone powder which does not contain any radioactive elements after testing by national authoritative departments. It is a new green and environmental protection ground decoration material.Cuautla,The most common causes of wood floor cracking are the moisture content of the floor and the dry humidity of the environment. For example, the moisture content of the wood floor is % and the local average moisture content is %. In order to balance the moisture content of the floor and the moisture content in the air, the dry air absorbs moisture from the wood floor, and the wood floor cracks in this processCommon cost methods for solid wood flooring are as follows:SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.