YaraHow thick is the solid wood composite floor,

Considering from the elements of economic development: strengthening is better than solid wood.If you buy solid wood, the quoted price is generally the price of bare board plus the price of installation and spare parts. In terms of comfort, strengthening and solid wood are better than ceramic tiles, because they are warm for many days and cool in summer.Second, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, narrow, not suitable for wide.Yara,Solid wood composite floor and reinforced composite floor are paved by dealers at this stage.The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks.New Amsterdam, Look at the surface of the board. From the surface coating, there are aluminum oxide, melamine and piano paint.Is the home floor paved with solid wood or structurally reinforced floor?

The biggest highlight is that they are not afraid of water and shop willfully anywhere.Computer simulation printing technology is different from pure wood flooring.Reinforced floor patterns can be designed in a variety of forms.The quality of decorative layer directly affects the user&#;s use effect.The higher the price of the composite layer, the decoration layer must be the best raw material.Wear resistant layer affects the price of composite floor.The anti-wear layer directly affects the service life of laminate flooring.At present, the common laminate flooring in the wood flooring market can not achieve high strength and wear resistance coefficient, but can only achieve laminate flooring.In these coatings, the wear resistance can reach revolutions.The price of land timber is an important factor determining the price of land timber.We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood, composite and reinforced?Installation requirements,Finally, look at the price Good fire resistanceSecond, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, narrow not suitable for wide.

The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally,YaraPlastic floor, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Finance Department,Look at the substrate break the floor and look at the substrate inside. There are no impurities in the good substrate and the color is relatively pure. A large number of impurities can be seen with the naked eye in the poor floor substrate.Most domestic floors use fast-growing forests, and wood has been used since to years. However, imported floors, especially FSC certified plates, have strict restrictions on wood species, so wood base materials are better.PVC floor has ordinary floor raw materials, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet,YaraWhich kind of household floor leather is better, such as hospital wards, school libraries, multi-al halls, cinemas, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooringYara,Related questions edit voice Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, schools, office buildings, shopping malls, supermarkets, which has the advantage of environmental protection.