Some people say this method is unscientific and laminate flooring can&#;t soak in water, but I have done some experiments and come to another conclusion. After days,HaidijiaoWhat are the brands of waterproof wood flooring, maggots appeared on the floor.This problem is because the floor contains a lot of impurities.Haidijiao,Three layer solid wood floor Good fire resistanceKulim, Method of forging solid wood floorThe cross section of the floor is rubbed with a file, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃, and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell:Precautions for solid wood floor installation : prevent keel from drying.

Third, look.Laminate flooring is not recommended. The formaldehyde emission of ℃ flooring is much higher than the conventional standard.If you really want to choose, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.Total quality management, Various surface treatments (concave convex pattern, pair pattern, mirror pattern)advantageBefore installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.

After the solid wood floor is transported to the project installation site,HaidijiaoLaminate flooring solid wood flooring, it shall not be unpacked and installed immediately.After unpacking, it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.original,The joint of the floor adopts the form of latch, which controls the vertical displacement of the floor and the horizontal displacement of the floor;The original tenon and groove type, can only control the vertical displacement of the floor.No matter how early the wooden floor plate is, there is no tenon and groove at the joint and the displacement in any aspect can not be controlled. Therefore, the floor plate often tilts up and stumbles when walking, which is inconvenient.Since the wear-resistant layer on the surface of the strengthened ground has good wear resistance, compression resistance, impact resistance, fire and flame retardancy, chemical pollution resistance and other properties, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the ground is greasy and dirty, it can be wiped with a rag and detergent.After the solid wood floor is transported to the project installation site, it shall not be unpacked and installed immediately.After unpacking, it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.Haidijiao,Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, the floor will arch up and the paint will crack.Therefore it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.Secondly, choose the color you want.SPC floor has a thickness of mm-mm, and the weight per square meter is only about -kg, which is less than % of ordinary ground materials. It has incomparable advantages in building load-bearing and space saving in high-rise buildings.At the same time, it has special advantages in secondary decoration and transformation.