The standby submersible slurry pump shall roll the shaft / turn every week to make the bearing uniformly accept the static load and external oscillation. The building structure in the water pump room shall be reconstructed. Sound absorbing and isolating plates shall be installed around the wall and on the top of the machine room and fixed with light steel keel; The connecting holes between the machine room and other rooms are tightly blocked,　　 selection of flow: single suction pump or double suction pump shall be selected according to the flow; single suction pump or multi suction pump shall be selected according to the lift.Sudbury,　　The sub bearing and cylindrical roller bearing can bear the maximum axial and radial loads of the pump. The bearing is lubricated with grease. The two ends of the bearing body are provided with sealing end caps, labyrinth sleeves and labyrinth rings,SudburyVertical multistage centrifugal pipeline pump, which can effectively prevent dirt such as mineral slurry from entering the bearing ensure the safe operation of the bearing and have a high service life.　　It is also necessary to clean the ventilation duct to avoid blockage.Ridderkerk,　　Under the action of auxiliary devices,SudburyZD slurry pump, it can transport the slurry, and because the sealing device itself is special, it can also ensure the internal and external balance of the submersible slurry pump during transportation, so that the pressure at both ends of the equipment can be balanced during normal use　　A large amount of lubricating oil is stored.　　The motor is scrapped. Moreover,SudburyTwo stage slurry pump, because the length of the long shaft is generally fixed, and the application occasions are subject to many restrictions.

　　It is an auxiliary means of on-site monitoring. During the operation of the submersible slurry pump, the condition of its overflow parts is very important to the overall operation. In order to let everyone know more about the equipment, we will learn how to adjust the impeller clearance of the pump in this issue. I hope it will help you.　　 the resistance shall be greater than megohm after filling with water. Turn on the power supply to test the steering and mark the continuous position.　　Strong strength and other advantages. It is widely used as a sealing device for various pumps. Place a water seal ring at the bottom of the packing box, and then place the filler.Price,　　Rate.　　Reasonable.　　In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium, so that the equipment can be used without its

　　It is an auxiliary means for some on-site monitoring.Honest service,　　Yes, summer is the peak sales season. In addition to agricultural applications, industrial pumps have also increased in recent years.　　 Store in a well ventilated and dry place. If it is stored during idle period, the pump shall be slowly lifted from the water source and drained (especially in cold winter).　　What is the order.Sudbury,　　When the slurry pump is working, the suction pipe in water, and the pump needs to be started. Due to the structural limitations of the mud pump and submerged slurry pump, the motor needs to be placed on the water surface during operation, and the pump must be fixed when it is put into the water. Otherwise, the motor will fall into the water　　 First of all, we need to choose equipment with formal certificates when making choices. We must avoid buying some obsolete or inferior products. And sometimes when the pump is in use multiple pumps need to be used in parallel or standby pumps need to be prepared.　　 Moreover, the processes of these two pumps are also different, and the sewage pump can generally be adjusted. Submersible pumps are generally used in some special or other places.