In order to prevent long-term trampling and wear of the wood floor and often maintain its luster, the wood floor wax maintenance agent can also be added after the wood floor is cleaned.In addition, remove black rubber traces and other dirt that cannot be removed with water on the wooden floor, and wipe it with a soft rag dipped in low concentration alcohol or a small amount of liquor.First, smell. easy careTicuantepe,Sixth, fire and flame retardant. Moisture proof, no deformation in case of water and can be used in kitchen, basement, etc.Birmingham, Silencing, not easy to be injured when fallingIn particular, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters. Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.

In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing, it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsThe utility model adopts a three-layer solid wood composite floor, which is less durable than the double-layer floor, has good hand feeling, beautiful and generous, and contains a small amount of indoor formaldehyde.Use place of SPC floor: because of its thin thickness, many colors complete styles and low-carbon environmental protection performance, it can be widely used in kindergartens, hospitals, offices, office buildings, shopping malls, homes,TicuantepeWhat is SPC stone plastic floor, KTV and other public places. Ecological and environmental protection.Customer first, Ultra light and ultra-thinThe raw materials of SPC floor are PVC (PVC) and calcium carbonate, which are thermally compounded by advanced technology. The production process is different from that of wooden floor, so its thermal expansion and cold contraction properties are also different;Maintenance method editing voice

Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooringMeticulous workmanship,Through the investigation, the following conclusions are drawn:Two layers of solid wood composite floor.Note edit voiceTicuantepeFinally,TicuantepeGround waterproof floor,TicuantepeWhat brand does laminate floor choose, heat conduction is fast.If there are cracks inside the wooden floor, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.