In this way, a smooth surface can be formed on the surface.　　The impeller of the submersible slurry pump may need to be disassembled for maintenance or repair during use. However, when we do not know the pump structure, we may make mistakes during disassembly. Let&#;s take a look at the correct disassembly of the impellerSanta Cruz de elsebo,　　 No maintenance: if it is not used continuously after startup, the submersible pump will rust and cannot be started. If it is not used for a long time, do not immerse it in water for a long time. Put it into clean water and run it for a few minutes to clean the mud inside and outside the pump.　　The packing seal, auxiliary impeller seal and mechanical seal are mainly used. Among them, the packing seal needs small leakage and is not suitable for transporting toxic, corrosive and precious liquids; The sealing of the auxiliary impeller relies on the reverse pressure of the two sealing impellers during rotation to prevent the leakage of the medium, and can also play a role inCotonou ,　　Stop, then tighten the bearing seat, press down the nut, and fix the axial position of the rotor. The latter submersible slurry pump uses a barrel support, which generally does not need to adjust the impeller clearance. Therefore, if there is a problem with the clearance in the future use, loosen the support clamp first, and say that the nut is loose　　 The submersible slurry pump usually relies on water cooling to dissipate heat. If the motor leaks out of the water without water cooling, the motor temperature will rise,Santa Cruz de elseboVertical non clogging sewage pump, so it is easy to burn out the motor.　　 Then replace the pulley and pump cover plate and tighten the fixing nuts.

　　With the continuous development of slurry pump technology, submersible slurry pump appears in response to market demand. It is especially suitable for the depth at which the vertical slurry pump cannot operate. The underwater part of the vertical slurry pump is generally not more than m, and of course it can be more than. For example, the maximum design depth of our company&#;s underwater slurry pump can reach m, so it will lead to the unreliability of the operation of the vertical slurry pump from time to time.　　Static water level refers to the water level before the pump is started.　　It, generator and market formed at the beginning of construction have gradually formed a certain scale after more than ten years of rapid development. In the early stage, in order to meet the needs of market development, generators and other mechanical and electrical products were collectively moved to the phase II market for operation. With a good business environment, water pumps and generatorsTotal quality assurance,　　Be sure to choose a pump that is more suitable for use.　　The equipment is integrated with the oil cooler, with compact layout. The water pump meets the modular and integrated design requirements of diesel engine parts. The joint surface with oil cooler adopts rubber sealing method, which has good sealing effect. Submersible slurry pump is a kind of solid-liquid mixing medium with the help of centrifugal force　　It will generate heat but when it is serious, it is necessary to check whether the fan of the submersible slurry pump is damaged or rotating

　　Start the priming pump. Moreover it will directly burn out the insulation; There may also be some faults in the ventilation system. At this time,Santa Cruz de elseboWQ submersible sewage pump, due to the structural limitations of the submersible slurry pump,Santa Cruz de elseboQuotation slurry pump, the motor needs to be placed on the water surface for use during operation, and then the pump needs to be placed in the water for use. Therefore the submersible slurry pump must bemanagement,　　Yes, such mechanical faults will cause the stator winding of the pump to be burnt out.　　Fire pump control cabinet generally has two control modes: one is fire hydrant control, the control circuit moves the main circuit　　In fact, it can only be opened or closed, and the action time when opening and closing is relatively short.Santa Cruz de elsebo,　　What is the solution to this situation?　　About %), and motor power p=i × U indicates that high power and current will increase.　　The application of pumps involves all aspects of work and production, and the types of pumps are also diverse. Some of the same pump have several names, which makes it difficult to distinguish. Today, we will introduce the submersible pump and the submersible slurry pump. Is there any difference between the two