Green environmental protection. SPC floor is a new floor material invented in response to national emission reduction. PVC resin, the main raw material of SPC floor is an environmentally friendly and non-toxic renewable resource. It is free of formaldehyde, lead and benzene, heavy metals and carcinogens, soluble volatiles and radiation. It is truly natural environmental protection.SPC floor is a reusable ground material, which is of great significance to protect our earth&#;s natural resources and ecological environment.Since the wear-resistant layer on the surface of the strengthened ground has good wear resistance, compression resistance, impact resistance, fire and flame retardancy, chemical pollution resistance and other properties, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the ground is greasy and dirty, it can be wiped with a rag and detergent.Tustra Gutierrez,The first thing to look at is the tree species.The special use environment of ground temperature is not suitable for all solid wood flooring. Therefore, when selecting ground temperature solid wood flooring, it depends on whether the ground temperature solid wood flooring is within the selection range of ground temperature solid wood flooring.Of course, there are people who sell dog meat by hanging sheep&#;s head.Taking the hot floor of oak floor as an example, non-standard manufacturers may misunderstand consumers with non-standard names.Formal flooring enterprises usually display wood names, Latin and other information on the back of the floor.Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring?Anbyon-up,The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since , the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.What is the difference between solid wood flooring and solid wood composite flooring? Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover,Tustra GutierrezFloor selection, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from,Tustra GutierrezHow much is the wooden floor, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.

Solid wood flooring is made of natural wood materials, which is integrated without production and processing. Of course, it accepts the unique characteristics of wood, which is easy to arch and deform.Production and processing of composite flooring is generally not easy to happen.After - wooden floors are assembled on the flat ground,Tustra GutierrezImported laminate flooring, touch them with your hands and check with your eyes to see whether the processing accuracy is smooth and smooth, and whether the tenon and groove teeth bite is suitable. It can not be very loose or too tight.Carefully assemble the height width ratio difference and gap.In modern home life, laminate flooring is deeply loved by consumers because of its excellent wear resistance and low price.However, they don&#;t know much about formaldehyde.Therefore, we are still cautious about choosing to buy Laminate flooring.So what is formaldehyde?Precautions for solid wood floor installation : solid wood floor cannot be used immediately after disassembly and packaging.Quality improvement,PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet, such as hospital wards, school libraries, multi-al halls, cinemas, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.The quality of solid wood composite floor is stable, not easy to damage and easy to use.Molded plate: a remarkable feature of molded plate is that there is an arc depression on the upper edge of the plate. After the two plates are assembled, they are closely combined, but there is a small groove, which is called U-shaped groove in the industry. In most cases, this kind of plate is reinforced floor.One of the great advantages of the molded plate is that it is easy to clean. It is very convenient to clean the dust in the small ditch, as long as you wipe it with a rag or mop.

The wooden floor packaging produced by reliable manufacturers should have the manufacturer&#;s name, detailed address, operation manual and national standards marked in Chinese.Since the national standard for lifting wood flooring has been gradually implemented, and its name and serial number are the national standard: GB / t- prepreg paper laminated wood flooring.average method,A good paper cutter can be used to cut at will. In addition, it can be composed of raw materials with different colors. It is especially suitable for floor tile mosaic ground. It can be composed and matched at will. It makes full use of the intelligence of interior designers to achieve the most ideal practical effect of decoration design;It is enough to turn your ground into handicrafts, and your life and home into a temple of plastic art, full of plastic art atmosphere.Inspection results:Precautions for solid wood floor installation : prevent keel from drying.Tustra Gutierrez,The crystal surface is basically flat. It&#;s easy to take care of and clean up.Structure: solid wood surface material, basic manual.The flame retardant grade is B and the indoor formaldehyde is higher than the national standard.