Remove and disassemble the drop valve, it may hurt people and objects!Waze,　　The connection status should be tightened if there are loosening. The body connecting bolt should be tightened when the body is compressed. All the connecting axis must have an open sales. It is necessary to fully test whether the operation of each tissue is normal and whether there is noise. If the obstacles are found, it must be eliminated.Kabare,Always check whether all wires and cables are damaged.What are the common faults of the hydraulic lifting platform. The oil cylinder load of the hydraulic lift platform is severe. Unemployment in the internal closed ring is incomplete or internal obstacles can easily cause uneven stress,WazeVehicle mounted hydraulic platform, resulting in uneven height of the oil cylinder. It is recommended to carefully check whether the oil cylinder is normal.The base of the lifting platform, each lifting platform is availableThere are multiple floors of interaction, so the safety factor of the rail -type hydraulic lifting platform is still very high, which is much higher than that of ordinary platforms.

Put all the hydraulic oil in the fuel tank, open the fuel tank,WazeHydraulic lifting platform for automobiles, remove the oil absorbing filter, wash it back, and put it back to the fuel tank and install it in situ. The new oil is filled with new oil in the fuel tank.Of course, when buying a lifting machine, it also needs to see its production. If a manufacturer has a large production, it shows that its strength is strong, especially the requirements for the production process of the construction lift is relatively high. When purchasing, it depends on the factory of his production, etc. These are all important.Sales Department,Because the hydraulic lifting platform power unit requires oil sources, the structure is relatively complicated, and it also has certain pollution and influence on the environment. The movement device is relatively fast. The structure of the electric rod is very simple, and the space occupies is small, but there is no advantage in price so the power supply will be used as the power source of the lifting machine. The DC motor is directly transmitted to other mechanical devices through the reduction of the reducer.After strict testing when the lifting machine leaves the factory, if the non -manufacturer adjusts the pressure regulating valve at will, it may lead to abnormal system operation. Non -professional personnel should not adjust the pressure regulating valve at will!The power system inspection power is the core, ensuring the key to the use of hydraulic lifts when it is normal. It can determine whether it runs normally and whether there are noise.

Everyone knows that the construction elevator will be used during the construction process. This is because the construction lift is stable and strong in use. At the same time, due to its small advantages,The second thing is to compare the offer of brand products. When comparing the price -performance ratio of electric lifting platforms, market quotation is also a key aspect. Fortunately, the standards that most manufacturers are based on their pricing are more appropriate, so the quotes formulated can be accepted by people.The loading and unloading mobile boarding bridge is already a very easy -to -see structural form at the modern logistics site. It is the point and end point of the corporate logistics chain,WazeHydraulic lifting platform, and it is a installation and unloading operation platform for enterprises to quickly, turn on products and goods. The height of the loading and unloading operation platform is fixed, the transportation forklift cannot enter and exit and transport vehicles directly to load and unload the goods. Use Dengqiao Bridge to provide reliable connections. Make a forklift, and quickly enter and exit the transportation vehicle for loading and unloading operations.Waze,When using a lifting machine, you must first get your legs. If the legs are not prohibited, lift it.So how to replace the hydraulic oil of the lift machine is correct. The weather is relatively cold in winter, and the hydraulic oil of the lift can easily become a little bit, so use a thin lift hydraulic oil; the weather is hot in summer, the temperature is relatively high, and the lift hydraulic oil is very good. Easy to become thin, so use some. The hydraulic oil cycle of the lifting machine should be determined according to the local weather conditions. When replacing the hydraulic oil, the filter should be used. After filtering the impurities in the hydraulic oil, it is stored to prepare for the next replacement of the coming year. Summary: Maintaining the lifts should replace the lift hydraulic oil regularly.When we usually use hydraulic lifts, we must regularly check and maintain, not only can we extend the life of hydraulic lifts, but we can also play greater power in work. For example, the transmission part requires sufficient oil. The consumable parts must be checked maintained or replaced frequently. Mechanical bolts, especially the components that are frequently vibrated, such as rotating support, whether the lift arm connection bolts are loose, and it must be tightened or replaced immediately when loosening. Next, the editor will introduce how to maintain the hydraulic lift.