Whether I-section steel is ordinary or light, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for members bent in the plane of their web or form lattice stressed members. It is not suitable for axial compression members or members with bending perpendicular to the web plane, which makes it very limited in the scope of application. I-beam is widely used in buildings or other metal structures.Aiming at the connective tissue and texture produced in stainless steel plate Position and other crystal defects are generally removed by heat treatment processes such as quenching or quenching. The effect of quenching is to optimize the crystal, eliminate structural defects, reduce strength, improve plastic deformation, and also conducive to cold drawing. In the production and manufacture of cold drawn alloy pipe, quenching machinery and equipment cannot be lacked. Therefore, the formulation of appropriate annealing process is a necessary condition to ensure that the alloy pipe mechanism meets the standard and the commodity does not crack. If the manufacturer in order to better one sidedness, reduce the product cost and reduce the quenching process, it will eventually lead to bad harm to the product quality.Bischofen, The rapid popularization and application of cold drawn ribbed bars and hot rolled grade III bars in China provides a good material basis for the development of welded mesh. The formal implementation of welding net product standards and application procedures has played a positive role in product quality and accelerating popularization and application.Alloy pipes are widely used in building materials,Bischofen273 welded pipe 1m heavy, and the test standards of alloy pipes are also different. Alloy pipe has high hardness and can be used at many levels, most of which is prestressed reinforcement. Where plastic deformation is not specified but compressive strength is specified, such stainless steel plate can be applied.Lavaleda,BischofenHow much is a welded pipe, Judged as failing. The small length of repair welding is mm; The raw material shall not exceed mm after grinding by welding edge.Alloy pipes can be used for heating (cooling) projects.

Difference and application description between H-beam and I-beamWire sleeve: it is also a general carbon steel welded steel pipe. It is used in concrete and various structural power distribution projects. The commonly used nominal diameter is from -mm. The wall of wire sleeve is thin, which is mostly used after coating or galvanizing,When selecting I-beam in structural design, reasonable I-beam shall be selected according to its mechanical properties,BischofenWhat is the diameter of 1.5-inch welded pipe, chemical properties, weldability and structural size. I-beam is mainly divided into ordinary I-beam, light I-beam and wide flange I-beam. According to the height ratio of flange to web, it is divided into wide, medium and narrow flange I-beams.GB No. I-beam is in height in leg width and in waist thickness.The specification of pass design I-beam is expressed in cm of waist width. For example, the waist width of No. I-beam is. The types of I-beam include hot-rolled ordinary I-beam, light I-beam and wide parallel leg I-beam (H-beam). The waist width of hot-rolled ordinary I-beam in China is ~, expressed as No. ~ No., and the inclination of inner wall of leg is : The pass system of rolled I-beam includes direct pass system, cross pass system and mixed pass system. In addition, I-beam can also adopt special rolling method.

The core of C-section steel is the structural system of braced frame. More than half of such senior managers in China are the former. Unfavorable to earthquake resistance. Hydraulic power, and the power is large, generally about KW, which is similar to the plate shearing and bending machine. The general control process is complex, and PLC control is mostly used.Honesty and mutual benefit,b. The professional two-sided arc welding processing technology can complete the electric welding at a good position, which is not easy to have the disadvantages of staggered joint, welding deviation and incomplete penetration, and it is very easy to manipulate the welding quality.Compared with manual binding welded steel mesh can reduce the occurrence of cracks by more than %. The use of reinforcement mesh can make the project construction faster. As long as the reinforcement mesh is laid as required, the concrete can be poured, eliminating the links of reinforcement on-site cutting, placing one by one and binding. It can save % - % of working hours, greatly accelerate the construction progress and shorten the construction cycle.Due to the relatively high and narrow section size of ordinary I-beam and light I-beam, the moment of inertia of the two main sleeves of the section is quite different, which makes it very limited in the scope of application. The use of I-beam shall be selected according to the requirements of design drawings.Bischofen,I-beam, also known as universal beam, is a long strip of steel with I-shaped section. I-beam is divided into ordinary I-beam and light I-beam. It is a section steel with I-type section shape.Requirements of alloy tubes for low and medium pressure boilersThe utility model has the advantages that the axial force of the roll is small, the axial movement is small, the working inclined plane is not required, and more passes can be matched under the condition of a certain length of the roll body.