or just the cracks on the paint surface of the wooden floor

If the cracks on the surface of the wooden floor are not serious, we can consider renovating the wooden floor flattening the cracked part of the floor and repainting it. Stable quality and not easy to damage: the solid wood composite floor plate adopts double plate composite type, and the wood chemical fiber is bent into a network structure and laminated. Various thermal stresses of wood are integrated into multiple plates to ensure the flatness and stability of the wood floor and preserve the beauty of the solid wood floorMorelia,Tactile effect: when people contact with wood, the temperature is close in four seasons. When walking on the wood floor, the hardness is moderate and the elasticity is rich. Wood gives people a good sense of touch.How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.ELFORD,Formaldehyde damage.Generally, the moisture content of non dry wooden keel is about %, and that of qualified wooden floor is generally about %. If the humidity difference is too large, the wooden floor is easy to absorb moisture quickly. If the time is long, it is best to choose dry and straight wood as keel.After the keel level is determined, the keel and floor can be fixed with nails.When assembling the solid wood floor, do not be too loose or too tight.The assembly relaxation shall be reasonably arranged according to the temperature of the indoor environment. The assembly relaxation will produce a large gap with the shrinkage of the floor.The assembly is too tight and the floor is arched when it expands.

The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions,MoreliaTop ten famous brands of composite flooring,MoreliaWhat are SPC flooring manufacturers, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high.Then select one or more floor waxes, which can be adjusted to the same tone as the floor.Heat the strip solid recovery wax with an electric soldering iron and fill it on the scratches on the floor. No scratches can be seen.Second, the time of birth.How much does it cost?,In addition to the second article, the other five articles determine the trend of floor price. Therefore, consumers must remember these five articles before buying their favorite products, and then go shopping to avoid buying losses.The wooden floor is warm in color, and it&#;s comfortable to shop at home without shoes, but most bosses love it and hate it. If you get wet, it&#;s easy to be damaged. It takes time to maintain health every time, so there is work in the floor industry again.Have you ever heard of SPC flooring?Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusionHow to lay lacquer cloth?The construction procedures and methods are as follows: first, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving, the indoor ground shall be treated first.

Whether it is solid wood composite floor or solid wood floor, its surface needs to be maintained and does not want to strengthen the surface of the floor.When cleaning the solid wood floor,The first kind: pungent taste. If the floor tastes like this, it means that it contains a lot of formaldehyde. You need to be careful when choosing. You&#;d better not buy it;Excellent SPC floor has strong wear resistance, depiction resistance, pollution resistance and compression resistance. It is widely used in hospitals, colleges, office buildings, processing plants,MoreliaWaterproof board, shops, chain hotels, exhibitions, public libraries, stadiums, subway stations and other public places.SPC floor is constantly favored by people at home and abroad. It is an all-round new favorite integrating the advantages of ceramic tiles and other types of floor materials. It is presented and interpreted with a variety of colors, environmentally friendly materials and diversified colors, making the noise and disturbance lose the sense of existence.Let&#;s take a look at the advantages of SPC floor after class.Morelia, Never soak the floor with water during use. If there is an accident, mop the floor with a dry mop in time. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use the width is mm ~ mm ~ mm, high and medium grade products should be selected, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.The flame retardant grade is B, and the formaldehyde concentration is acceptable.Precautions for solid wood floor installation : prevent uneven ground.